AS216394 · WireShield

Documentation

Setup, connection and day-to-day operations guides.

Choosing a protection model

All models use the same protection platform and the same management portals. The decision is about where you want traffic to be filtered and who you protect.

Quick comparison

Remote protectionWireShield EdgeMSSP & Partners
Traffic is filteredIn the WireShield networkIn your own network, inlineIn either, for many customers
Hardware neededNone (Router VM if you have no router)WS-X appliance or compatible serverDepends on the model you choose
ConnectionBGP, with GRE, VXLAN or cross-connect deliveryInline between uplink and internal networkPer customer
Best forKeeping your current data center and prefixesKeeping all traffic inside your own networkProviders protecting many customers

Questions that decide it

  1. Do you have your own prefixes and an ASN? Remote protection works over a BGP session with your own prefixes and ASN.
  2. Do you want traffic to leave your network for filtering? If not, WireShield Edge filters it on-site.
  3. Do you already have suitable hardware? For Edge you can choose a ready WS-X appliance or use your own compatible server.
  4. Do you protect one network or many customers? Many customers means the MSSP platform.

Combining models

On-premise protection and Remote protection can be planned together. In a technical session we decide which traffic is filtered where.

If you are unsure, describe your topology and traffic. We will recommend a model and the connection method that fits.

Next steps

Still have a question about this guide?
Ask our technical team